Need help?Do you have a question about the FLIR E96 and is the answer not in the manual?
General| Resolution | 640 × 480 pixels |
|---|---|
| Temperature Range | -20°C to 1500°C (-4°F to 2732°F) |
| Field of View | 24° × 18° |
| Detector Type | Uncooled microbolometer |
| Digital Camera | 5 MP |
| Wi-Fi | Yes |
| Laser Pointer | Yes |
| Image Frequency | 30 Hz |
| Accuracy | ±2°C (±3.6°F) or ±2% of reading |
| Digital Zoom | 1-8x continuous |
| Laser Distance Meter | Yes |
| Operating Temperature Range | -15°C to 50°C (5°F to 122°F) |
| Storage Temperature Range | -40°C to 70°C (-40°F to 158°F) |
| IP Rating | IP54 |
| Thermal Sensitivity | <30 mK at 30 °C (86 °F) |
| Display | 4" LCD touchscreen |
| Storage Media | SD card |
| Battery Type | Li-ion battery |
| Minimum Focus Distance | 0.15 m (0.49 ft) |
| Spectral Range | 7.5 – 14 μm |
| Weight | 1.2 kg (2.7 lbs) |
Safety for digital devices, FCC compliance, RF exposure, and laser warnings.
Critical safety instructions for battery handling, charging, and potential hazards.
Cautions regarding liquids, high temperatures, and battery environmental safety.
Safety for battery connections, water exposure, and lens cleaning.
Safety regarding battery condition, charging, and compatibility with devices.
Specific precautions for cleaning the infrared lens to avoid damage.
Step-by-step procedure for starting and using the camera for the first time.
General instructions for charging the camera battery.
Procedures for charging the battery with stand-alone and USB chargers.
Steps for manually adjusting the camera's focus.
Explanation and procedures for autofocus and continuous autofocus.
Operating the laser distance meter, including safety warnings.
Steps for measuring surface areas using the camera and laser.
Procedure for safely changing the camera's lenses.
Importance of calibrating new lenses with the camera.
Step-by-step guide for the AutoCal calibration procedure.
Procedure for saving an image by pulling the trigger.
How to preview images before saving and make adjustments.
Overview of key functions and settings affecting image quality.
Importance of focus and procedure for manual adjustment.
Procedures for autofocus, continuous autofocus, and their methods.
Methods for adjusting the infrared image display.
Procedure for adjusting the image using the touch screen interface.
Procedures for manual image adjustment using navigation pad.
How to adjust the temperature range for accurate measurements.
Importance of setting parameters like emissivity and object distance.
Steps to set global measurement parameters.
Steps to change parameters for specific measurement tools.
How to set alarms based on measurement conditions.
Steps to set an alarm for a spot measurement.
Steps to set an alarm for a box or circle measurement.
How color alarms help discover anomalies in infrared images.
Procedures for setting up interval, condensation, and insulation alarms.
Overview of the Inspection Route feature for structured inspections.
Steps for preparing and capturing data during an inspection.
How to edit data for specific inspection points.
Steps to pair Bluetooth devices with the camera.
To Next Page
