Handling the camera
7
2. Connect a USB cable to the USB-C connector in the connector bay. Connect the oth-
er end of the USB cable to the computer.
Note
• To charge the camera, the computer must be turned on.
• Charging the camera using a USB cable connected to a computer takes considerably
longer than using the USB battery charger or the stand-alone battery charger.
7.2 Removing the battery
1. Turn off the camera.
2. Remove the battery from the camera.
7.3 Turning on and turning off the camera
• To turn on the camera, push the on/off button .
• To turn off the camera, push and hold the on/off button
for more than 0.5 second.
Note Do not remove the battery to turn off the camera.
#T810587; r. AA/74078/74713; en-US
19
To Next Page
Loading...
Need help?
General
