Notice to user
3
3.1 Online documentation
Our manuals are continuously updated and published online.
To access the latest FLIR Exx user manual, go to http://support.flir.com/resources/5v82.
To access the latest releases of manuals for our other products, as well as manuals for
our historical and obsolete products, go to the Download tab at http://support.flir.com.
3.2 Register your camera
Register your camera to receive an extended warranty and other related benefits.
To register the camera, go to http://support.flir.com/camreg.
To access the registration form, you must log in to your FLIR account or sign up for a new
account.
You will also need the serial number of your camera. The serial number is displayed by
the registration wizard in the camera.
To start the registration wizard, turn on the camera and select Settings > Device settings
> Camera information > Register camera.
To complete the registration, you must enter a verification code into the camera. The
code is available in your FLIR account, under My Products.
3.3 Accuracy
For very accurate results, we recommend that you wait 5 minutes after you have started
the camera before measuring a temperature.
3.4 Calibration
We recommend that you send in the camera for calibration once a year. Contact your lo-
cal sales office for instructions on where to send the camera.
3.5 Training
For training resources and courses, go to http://www.flir.com/support-center/training.
3.6 Important note about this manual
FLIR Systems issues generic manuals that cover several cameras within a model line.
This means that this manual may contain descriptions and explanations that do not apply
to your particular camera model.
#T810587; r. AA/74078/74713; en-US
6
To Next Page
Loading...
Need help?
General
