Working with views and images19
6. Push the
button to leave the setup mode.
19.4 Editing a saved image
19.4.1 General
You can edit a saved image. You can do one or more of the following tasks:
• Edit measurements.
• Adjust the image.
• Delete the image.
19.4.2 Procedure
Follow this procedure:
1. Open the image at full size in the archive. For more information, see section 19.2
Opening an image, page 61.
2. Push the joystick or the
. This displays a menu.
3. You can now do one or more of the following tasks. Move the joystick to go to a task
and push the joystick to select the task.
• Select
to edit measurement tools.
• Select
to adjust the image.
Note You can only adjust an image that has been saved in Auto or Manual mode.
An image saved in HSM mode cannot be adjusted. For more information, see sec-
tion 16.3 Adjusting an image, page 43.
• Select
to delete the image.
• Select
to save any changes and exit edit mode.
19.5 Deleting a file
19.5.1 Procedure
Follow this procedure to delete an image file, a video clip, or a video sequence:
1. Turn the mode wheel to
to enter archive mode. This displays the archive over-
view or an image at full size.
2. If an image is displayed at full size, move the joystick up to go to the archive overview.
3. Move the joystick up/down/left/right to select the image you want to delete.
4. Push the
button to display a menu.
5. Move the joystick up/down to select one of the following:
• Delete
• Delete all
6. Push the joystick.
7. Confirm the deletion and push the joystick.
#T810169; r. AN/42241/42268; en-US
62
To Next Page
Loading...
Need help?
General
