System onA
System offB
Activate the system using the switches on
the indicator stalk.
Setting the steering wheel
vibration level
The system has three intensity levels which
can be set using the information display.
See General Information (page 84).
Setting the system sensitivity
You can adjust how quickly the system
warns you of a dangerous situation. The
system has two sensitivity levels which can
be set using the information display. See
General Information (page 84).
System warnings
A column of lane markings is displayed
either side of the vehicle graphic.
The lane markings are colour coded as
follows:
• Green - The system is ready to warn
you of any unintentional lane
departure.
• Red - The vehicle is approaching or is
too close to the detected lane
boundary. Take immediate safe action
to reposition the vehicle.
• Grey - The relevant lane boundary will
be suppressed.
Instances where a lane boundary may be
suppressed:
• Lane markings on the road may not be
detected by the sensor.
• The direction indicator for that side of
the vehicle is on.
• During hard acceleration and braking,
or if direct steering is applied.
• Vehicle speed is outside the operating
limits
• If there is an ABS or Stability Control
(ESP) intervention.
• Narrow lane width.
If the lane markings turn red or a vibration
is felt through the steering wheel you must
take immediate and safe action to align
the vehicle and correct any unintended
lane drift.
177
Lane Departure Warning
To Next Page
Loading...
Need help?
General
