Ford MONDEO User Manual

Note: Type 3 instrument clusters have a
slightly different menu structure. Select
Settings first to access Information.
1. Press the right arrow button on the
steering wheel to enter the main menu.
2. Highlight Information with the up and
down buttons and press the right arrow
button.
3. Highlight Tyre Pressures with the up
and down buttons and press the right
arrow button.
4. Highlight the desired setting and press
the OK button to confirm the setting.
5. Press the left arrow button to exit the
menu. Hold the left arrow button
pressed to return to the trip computer
display.
Setting the vehicle load
Note: Type 3 instrument clusters have a
slightly different menu structure. Select
Settings first to access Setup.
Correct tyre pressure settings depend on
vehicle load. See Technical
Specifications (page 239). The system
can only detect low pressure if you have
entered the current vehicle load.
1. Press the right arrow button on the
steering wheel to enter the main menu.
2. Highlight Setup with the up and down
buttons and press the right arrow
button.
3. Highlight Tyre Pressures with the up
and down buttons and press the right
arrow button.
4. Highlight the desired setting and press
the OK button to confirm the setting.
5. Press the left arrow button to exit the
menu. Hold the left arrow button
pressed to return to the trip computer
display.
TECHNICAL SPECIFICATIONS
Wheel nut torque
Nm (Ib-ft)Wheel type
140 (103)All
239
Wheels and Tyres

Ford MONDEO Specifications

General

Brand	Ford
Model	MONDEO
Category	Automobile
Language	English