Ford MONDEO User Manual

Note: When fitting the headlamp, make
sure that you fully engage the headlamp in
the lower outer fixing point.
Note: When fitting the headlamp, tighten
the front screw first and then the rear screw.
CHANGING A BULB
WARNINGS
Switch the lights and the ignition off.
Let the bulb cool down before
removing it.
Have Xenon bulbs changed by a
trained technician. There is a risk of
electric shock.
CAUTIONS
Do not touch the glass of the bulb.
Only fit bulbs of the correct
specification. See Bulb
Specification Chart (page 69).
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
Headlamp
Note: Remove the covers to gain access to
the bulbs.
Direction indicator
1. Remove the headlamp. See
Removing a Headlamp (page 61).
2
3
E72259
2. Turn the bulb holder anti-clockwise
and remove it.
3. Gently press the bulb into the bulb
holder, turn it anti-clockwise and
remove it.
Headlamp main beam
1. Remove the headlamp. See
Removing a Headlamp (page 61).
3
2
E72261
2. Disconnect the electrical connector.
3. Release the clip and remove the bulb.
Headlamp dipped beam
1. Remove the headlamp. See
Removing a Headlamp (page 61).
63
Lighting

Ford MONDEO Specifications

General

Brand	Ford
Model	MONDEO
Category	Automobile
Language	English