EasyManuals Logo
Home>Fuji Xerox>All in One Printer>ApeosPort-VII C6688

Fuji Xerox ApeosPort-VII C6688 User Manual

Fuji Xerox ApeosPort-VII C6688
247 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #231 background imageLoading...
Page #231 background image
Stapler Faults
231
7 With grasping the orange lever of the staple cartridge, push the staple cartridge into its
original position until it clicks into place.
8 Close the finisher front door.
Note
z
If the finisher front door is not completely closed, a message will appear and the device remains paused.
If you cannot remove jammed staples even after you perform the above procedure,
contact our Customer Support Center.
Booklet Staple Jams in Booklet Staple Cartridge (for C3 Finisher with
Booklet Maker)
This section describes how to clear staple jam occurred in the booklet staple cartridge of the
C3 Finisher with Booklet Maker (optional).
1 Make sure that the device is not operating, and open the finisher front door.
2 Pull out the booklet unit.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fuji Xerox ApeosPort-VII C6688 and is the answer not in the manual?

Fuji Xerox ApeosPort-VII C6688 Specifications

General IconGeneral
BrandFuji Xerox
ModelApeosPort-VII C6688
CategoryAll in One Printer
LanguageEnglish

Related product manuals