Output Format
145
Copy
3
îš„ Off
Disables this feature.
îš„ Shift to Tab
Copies the image located on the edge of the document onto the tab area of tab stock paper.
Enter a value in [Shift Value] to adjust the position of the tab image so that it is correctly
copied onto the tab area. Only the shifted image is copied, which means that the rest of the
image on the document is not copied.
îš„ Shift All
Copies the whole image of the document onto tab stock paper.
Specify a value in [Shift Value] to shift the position of the image located on the edge of the
document so that the image can be copied onto the tab area.
îš„ Shift Value
Allows you to specify how much the image needs to be shifted in the range from 0 to 15 mm
in 1 mm increments.
îš„ Add Tab Stock
Allows you to specify the number of sheets of tab stock paper.
îš„ Paper Supply
Allows you to select a tray to be used for tab stock paper.
Face Up/Down Output (Specifying Face Up or Down)
This feature allows you to select whether to output copies facing up or down.
1 Select [Face Up/Down Output].
2 Select any option.
îš„ Auto
Automatically determines whether copies are output facing up or down.
îš„ Face Up
Copies are output facing up and delivered from the last page.
îš„ Face Down
Copies are output facing down and delivered from the last page.
îš„ Face Up (Reverse Order)
Copies are output facing up and delivered from the first page.
Note • To display [Face Up (Reverse Order)] on the [Face Up/Down Output] screen, a prior setting is
required in the System Administration mode.
To Next Page
Loading...
Need help?
General
