4 Scan
194
Scan
4
2 Select [Edit].
3 Select any option.
îš„ E-mail Address
To change the e-mail address, select [E-mail Address] and enter a new address on the
displayed keyboard.
îš„ Name
To change the recipient name, select [Name] and enter a new name on the displayed
keyboard.
When you specify a recipient from the Address Book and the recipient name is registered in
the Address Book, that recipient name is displayed.
îš„ S/MIME Certificate
Certificates which is linked to the e-mail address is displayed.
If S/MIME is enabled, and a certificate is linked to the e-mail address, you can check the
contents of the S/MIME certificate by selecting [S/MIME Certificate].
For information on S/MIME communication, refer to "13 Encryption and Digital Signature Settings" > "Configuration of E-
mail Encryption/Digital Signature" in the Administrator Guide.
From (Setting the Sender’s Address)
Specify a sender's e-mail address. You can specify only one address as a sender's address.
Note • When [Login to Local Accounts] is selected, the e-mail address registered in user information is
automatically set as a sender's address. For more information on user information, refer to "5 Tools"
> "Accounting" > "Create/View User Accounts" in the Administrator Guide.
• [From] may not be editable depending on the setting in the System Administration mode.
• When you send an e-mail with a digital signature, the items used in the signature are different
depending on the settings in the System Administration mode.
For information on a digital signature, refer to "13 Encryption and Digital Signature Settings" > "Configuration of E-mail
Encryption/Digital Signature" in the Administrator Guide.
1 Select [From].
To Next Page
Loading...
Need help?
General
