3 Copy
146
Copy
3
Folding (Outputting Bi-Folded/Tri-Folded Paper)
This feature allows you to fold copies in half or in three.
When the C3 Finisher with Booklet Maker (optional) or the Finisher D4 with Booklet Maker
(optional) is installed, [Single Fold] is available.
When the Folder Unit CD1 (optional) or the D4 Folder Unit (optional) is installed, [Z Fold]
and [C Fold] are also available.
Note • The supported paper orientation is only . Select the tray whose orientation is set to .
• [Z Fold] and [C Fold] can only be applied to A4 and 8.5 x 11" paper.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• When the C3 Finisher is installed, making the fold assisting crease on a paper is available. For more
information, refer to "5 Tools" > "Common Service Settings" > "Maintenance" > "Fold Assisting
Crease" in the Administrator Guide.
1 Select [Folding].
2 Select any option.
îš„ Off
Does not fold copies.
îš„ Z Fold
Folds copies in three with the printed side inside or outside.
îš„ C Fold
Folds copies in three with the printed side inside or outside.
îš„ Single Fold
Folds copies in half.
îš„ Image Inside Fold
Folds copies so that the image is printed inside.
îš„ Image Outside Fold
Folds copies so that the image is printed outside.
printing surface
comes outside
printing surface
comes inside
printing surface
comes inside
printing surface
comes outside
To Next Page
Loading...
Need help?
General
