Simple Copy
113
Copy
3
2 Select a copy ratio.
100%
Copies at the same image size as the original
document.
Auto %
Automatically determines the copy ratio based
on the document size and the paper size
specified in [Paper Supply], and copies the document to fit into the paper.
Note • This cannot be selected together with [Auto Select] under [Paper Supply].
Ratios
Allows you to select from preset copy ratios.
2 Sided Copying (Making 2 Sided Copies)
This feature allows you to copy 1-sided and 2-sided documents on one side or both sides of
paper.
1 Select any option.
1 1 Sided
Makes a copy of a 1-sided document on one
side of the paper.
1 2 Sided
Makes a copy of a 1-sided document on both
sides of the paper.
2 2 Sided
Makes a copy of a 2-sided document on both sides of the paper.
Auto / Color / Black & White (Selecting the Color for Copying)
This feature allows you to select a color mode.
1 Select [Auto], [Color] or [Black & White].
Auto
The machine automatically determines the
colors of the original document and makes
copies in full color if the original document is
colored, and in single color (black) if the
document is black-and-white.
Note • If a color document is in one of the following
conditions, the machine may copy the document in black and white.
- The colored area is too small.
-The colors are too light.
In that case, change a level from the five levels which is used for the machine to recognize color. For
more information, refer to "5 Tools" > "Common Service Settings" > "Image Quality Adjustment" >
"Image Quality" > "Output Color Recognition" in the Administrator Guide.
To Next Page
Loading...
Need help?
General
