Power Source
77
Product Overview
2
Switch the power off at the end of the day or when not using the machine for an extended
period of time.
You can also use the Power Saver feature to save power consumption while the machine is
not in use.
For information on the Power Saver feature, refer to "Power Saver Mode" (P.81).
Important • If the power is switched off, all the services of the machine will stop. When using the machine
throughout the day for jobs such as receiving fax, do not switch the power off.
1 Press the push-button power switch to switch
the power on.
When the Finisher-B1 (optional), the C3
Finisher (optional), or the C3 Finisher with
Booklet Maker (optional) is installed
Note • The “Please wait...” message indicates that
the machine is warming up. The machine is
not available during warming up.
• If the machine does not power on, check the
following:
- The power cord is plugged in.
- The main power is switched on.
- The <RESET> button is set on and is in the
depressed position.
Switching the Power Off
The following describes how to switch the power off.
Important • If the power is switched off, all the services of the machine will stop. When using the machine
throughout the day for jobs such as receiving fax, do not switch the power off.
Note • You can set the machine to be switched off automatically at the same time every day. For more
information, refer to "5 Tools" > "Common Service Settings" > "Power Saver Settings" >"Scheduled
Power Off" in the Administrator Guide.
1 Before switching the power off, make sure that the machine has completed all copy or print
jobs. Then, make sure that the <Data> indicator is not blinking.
Important • Do not switch the power off in the following situations. If the power is switched off, the data being
processed may be erased.
- While data is being received
- While a job is being printed
- While a job is being copied
- While a job is being scanned
To Next Page
Loading...
Need help?
General
