Fax/Internet Fax
227
Fax
4
• The Large Size Color UI (optional) does not support the one-touch buttons.
1 Press a one-touch button. Confirm that the
recipient (fax number) specified with the one-
touch button is displayed on the touch screen.
Important • The one-touch buttons have a sensor to
detect which page of one-touch buttons (1 -
24, 25 - 48, or 49 - M02) is currently opened.
Before pressing a one-touch button, turn over
the one-touch panel completely, and take off
your hand from the panel. Do not press the
button while you are turning over the panel.
• Do not place any objects near the one-touch
buttons, nor spill any liquid over them.
Note • To specify multiple recipients, press the one-
touch buttons continuously.
• Turn the one-touch panel over to press the
one-touch buttons 25 and above.
Specifying a Destination Using the Keyboard Screen
You can specify recipients using the keyboard screen.
Important • When transmission to a certain recipient is prohibited in the System Administration mode, the
keyboard button cannot be used.
1 Select the keyboard button.
2 Specify a recipient with up to 128 characters
using the keyboard displayed on the touch
screen.
Note • When the Server Fax service is used, a
destination must be less than 50 characters
long. The available characters are as follows:
0 to 9 Numeric characters
-Pause
# A starting character for a group number
\ A delimiter for private data. Using this character before and after private data
hides the destination string.
S A character for password verification
:DTMF signal
= A character to wait for dial tones
+ Available, but ignored
(Space) Available, but ignored
For more information, refer to the documentation provided with the Server Fax Kit.
To Next Page
Loading...
Need help?
General
