1 Before Using the Machine
24
Before Using the Machine
1
Others
420
80
2337
1623
25
2232
610
400
1123
100
With C3 Finisher with Booklet Maker (optional), Folder Unit CD1 (optional), HCF B1 (optional), and Side Tray
(Unit: mm)
Do not incline the product at more than 10 degree angle. Otherwise, it may
fall over and cause injuries.
Always lock the wheels of this product after installation. Otherwise, it may
fall over or slide and cause injuries.
To bundle wires and cables, always use the cable ties and spiral tubes that
Fuji Xerox supplies. Otherwise, it may cause some defects.
10
°
10
°
10
°
10
°
Front
Front
Left
Left
Back
Back
Right
Right
To keep this product in a good performance and condition, always use it in
the following environment:
Temperature: 10 - 32°C
Humidity: 15 - 85%
When the product is left in a chilly room and the room is rapidly warmed up
by heater, dew condensation may form inside the product and cause a
partial deletion on printing.
To Next Page
Loading...
Need help?
General
