Printing and Deleting Stored Jobs
433
Job Status
11
(Enlarged view)
A previewed image is enlarged or reduced.
In the enlarged view, the following operations are available.
Print Quantity
Specifies the number of print sets.
Output Color
Displays the output color of the document to be printed.
2 Sided Printing
Displays 1 Sided, Flip on Short Edge, and Flip on Long Edge.
Note • When the booklet layout is set using a printer driver, [2 Sided Printing] is not displayed on the screen.
Print
Prints the Delayed Print job. After printing, the job is deleted. If printed manually, the job
will not be printed at the specified time.
Refer to "When [Print] is Selected" (P.433).
When [Print] is Selected
1
Select [Yes].
Note • The screen as shown on the right does not
appear if [Print Job Confirmation Screen] is
set to [Disabled] in the System
Administration mode. If [Disabled] is
selected, the machine automatically deletes
the job after printing without displaying the
confirmation screen. For more information,
refer to "5 Tools" > "Stored File Settings" >
"Print Job Confirmation Screen" in the
Administrator Guide.
Yes
Starts printing the job. After printing, the job is deleted.
No
Cancels printing the job.
Feature Operation
Changing the ratio of the
image size
Double-tap a preview image or drag the slider.
Moving the display position Drag or flick the enlarged image side to side or up and down.
To Next Page
Loading...
Need help?
General
