Using the Operator Panel Menus 180
Enabling the Panel Lock
1 Press the (Menu) button.
2 Select Admin Menu, and then press the button.
3 Select Secure Settings, and then press the button.
4 Select Panel Lock, and then press the button.
5 Select Panel Lock Set, and then press the button.
6 Select Enable, and then press the button.
7 Enter the new password, and then press the button.
8 Re-enter the password to confirm the password that you entered, and then press the button.
NOTE:
• If you forget your password, turn off the printer. Then, while holding the (Menu) button, turn on the printer.
Continue to hold the (Menu) button until the display indicates to enter the new password. Release the
(Menu) button and enter the new password, and then press the
button. Re-enter the password to
confirm, and then press the
button. The display will briefly indicate the password has been changed.
• If you change the password, perform steps 1. Enter the current password, and then press the button.
Perform steps 2 to 4. Select Change Password, and then press the button. Enter the current password,
and then press the button. Perform steps 7 and 8. This will change the password.
To Next Page
Loading...
Need help?
General
