Troubleshooting 224
Understanding Printer Messages
The printer LCD panel displays messages describing the current state of the printer and indicates
possible printer problems you must resolve. This section describes messages, their meanings, and
how to clear the messages.
IMPORTANT:
• When an error code is displayed, the print data remaining on the printer and the information accumulated in
the memory of the printer are not secured.
Error-Code What You Can Do
010-397 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 267
016-500 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 267
016-501
016-502
016-602 This is not an error. You can continue operation normally.
016-610 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 267
016-612
016-718 Press the button to cancel the current print job.
See also:
• "Canceling a Print Job" on page 147
016-720
016-737
016-741
016-742
016-743
016-744
016-745
016-799
016-920 Press the button. Execute the operation again according to the operation procedure.
016-921
016-922 Press the button. Set only wireless LAN access point (Registrar) to be operated with
WPS-PBC, and execute the operation again according to the operation procedure.
018-318 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 267
024-340 Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorised dealer.
See also:
• "Online Services" on page 267
To Next Page
Loading...
Need help?
General
