Network Basics 62
Verifying the IP Settings
The following procedure uses Windows XP as an example.
1 Print the Printer Settings page.
2 Look under the IPv4 heading on the Printer Settings page to ensure that the IP address, network
mask, and gateway address are appropriate.
To verify if the printer is active on the network, run the ping command in your computer:
1 Click start, and select Run.
2 Enter cmd, and then click OK.
A black window is displayed.
3 Enter ping xx.xx.xx.xx (where xx.xx.xx.xx is the IP address of your printer), and then press the
Enter key.
4 Reply from the IP address denotes printer is active on the network.
See also:
• "Printing and Checking the Printer Settings Page" on page 63
To Next Page
Loading...
Need help?
General
