Printing Basics 131
Using the Stored Print Feature
When you send a job to the printer, you can specify in the print driver to store the job in the memory. When you are
ready to print the job, go to the printer and use the operator panel menus to identify which job in the memory you
want to print.
NOTE:
• The stored print feature is available when:
- The optional 512MB memory is installed.
- The RAM disk is enabled in the operator panel menu.
- RAM Disk is set to Installed in the print driver.
• The data in memory is cleared when the printer is turned off.
The stored print feature includes the following job types:
• "Secure Print" on page 131
• "Sample Print" on page 131
Secure Print
You can store print jobs secured with a passcode in the memory. Users with the passcode can print them from the
operator panel. This feature can be used to print confidential documents. You can select whether to delete the stored
job after printing. Otherwise, the stored jobs remain in the memory until you delete them from the operator panel or
turn off the printer.
NOTE:
• Secure Print is available when you use the PCL 6 or PS driver.
Sample Print
The collated print job is stored in the memory, but a single copy is printed automatically so you can check the print
result. If you do not have problems with the print result, you can choose to print more copies. This prevents large
number of misprinted copies from being printed at one time.
NOTE:
• Sample Print is available when you use the PCL 6 or PS driver.
Send confidential data.
Enter the passcode from
the operator panel.
Print data.
Confidential
Send data.
One set is
printed.
Check if the print result
is OK.
Print the rest of sets
from the operator panel.
To Next Page
Loading...
Need help?
General
