Fuji Xerox DocuPrint P355 d User Manual

140 Printing Basics
 Printing Custom Size Paper
This section explains how to print on custom size paper using the print driver.
The way to load custom size paper is the same as the one to load standard size paper.
NOTE:
• You can use custom size paper between the following ranges:
• For the standard 250 sheet tray, the optional 250 sheet feeder, and the bypass tray (duplex print)
- Width: 139.7 mm (5.5 inches) to 215.9 mm (8.5 inches)
- Length: 210 mm (8.27 inches) to 355.6 mm (14 inches)
• For the bypass tray
- Width: 76.2 mm (3 inches) to 215.9 mm (8.5 inches)
- Length: 127 mm (5 inches) to 355.6 mm (14 inches)
• XML Paper Specification (XPS) driver does not support custom size paper.
See also:
• "Loading Print Media in the Standard 250 Sheet Tray and the Optional 250 Sheet Feeder" on page 121
• "Loading Print Media in the Bypass Tray" on page 123
• "Setting Paper Sizes and Types" on page 128
Watermark • Watermark
– Edit
– Delete
– New
• Print on Page 1 only
• Defaults
Printer Features • Feature Sets: General
– Feed Orientation
– Paper Type
– Substitute Tray
– Custom Paper Auto Orientation
– Draft Mode
– Skip Blank Pages
– Halftone Screen Lock
– Image Quality
– Halftone
– Letterhead Duplex Mode
• Feature Sets: Color Balance K
– Low Density (K)
– Medium Density (K)
– High Density (K)
Summary
Item Printing Options

Fuji Xerox DocuPrint P355 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P355 d
Category	Printer
Language	English