Fuji Xerox DocuPrint P355 d User Manual

156 Using the Operator Panel Menus
•A4 Wide
Purpose:
To expand the printable area width 8 inch.
Values:
PDF Settings
Use the PDF Settings menu to change printer settings that only affect the PDF jobs.
NOTE:
• Values marked by an asterisk (*) are the factory default menu settings.
• Quantity
Purpose:
To specify the number of copies to print.
Values:
• 2-Sided Print
Purpose:
To specify whether to print on both sides of a sheet of paper.
Values:
• Print Mode
Purpose:
To specify the print mode.
Value:
• Password
Purpose:
To specify the password to print the secure PDF.
Value:
Off
*
Disables A4 Wide.
On Enables A4 Wide.
1sets
*
Sets the value in increments of 1.
1–999sets
1-Sided
*
Prints on one side of a sheet of paper.
Long Edge Flip Prints on both sides of a sheet of paper to be bound by long edge.
Short Edge Flip Prints on both sides of a sheet of paper to be bound by short edge.
Normal
*
For documents with normal sized characters.
High Quality For documents with small characters or thin lines, or documents
printed using a dot-matrix printer.
High Speed Prints with the higher speed than the Normal mode, but the quality is
less.
Password Enter the password to print the secure PDF.

Fuji Xerox DocuPrint P355 d Specifications

General

Brand	Fuji Xerox
Model	DocuPrint P355 d
Category	Printer
Language	English