Troubleshooting 213
Streaks Appear on the Output
Problem Action
Streaks appear on the output. The toner cartridge may be low or need to be replaced. Confirm the amount of toner
in the toner cartridge.
1 Check the toner level in the Status Monitor window.
2 Replace the toner cartridge as necessary.
If the problem persists, stir the developer in a drum cartridge.
Stir the developer in a drum cartridge.
1 On the operator panel, press the (Menu) button and select Admin Menu →
Maintenance Mode → Clean Developer.
2 Press the button.
If the problem persists, replace the drum cartridge if you have a spare cartridge.
Replace the drum cartridge if you have a spare cartridge.
See also:
• "Replacing the Drum Cartridge" on page 237
• "Installing a Drum Cartridge" on page 239
If the problem persists, contact the Fuji Xerox local representative office or an
authorised dealer.