Fujitsu Airstage VR-II ASUB24TLAV User Manual

4-2-4 Remote Controller Display
<< WIRED REMOTE CONTROLLER 3 wire type>>
If an error occurs, the following display will be shown.
(
“ “ will appear in the set room temperature display.)
If
“
“ is displayed, immediately contact authorized
service personnel.
Unit number (usually 0) Error code
Ex. Error code display
ERROR CODE DISPLAY
<< SIMPLE REMOTE CONTROLLER >>
Error code
Ex. Error code display
Faulty unit No.
(Remote controller address)
ERROR CODE DISPLAY
<< GROUP REMOTE CONTROLLER >>
The air conditioning system must be inspected if “ : “
(error code) appears on the timer and Clock Display, or the
operation lamp is flashing.
Model code
Error code
Ex. Error code display
ERROR CODE DISPLAY
Model code
: Outdoor unit
: Indoor unit
: Group remote controller
: Convertor
*1 ;
*1
If an error occurs, the following display will be shown.
(
“ “ will appear in the set room temperature display.)
If
“
“ is displayed, immediately contact authorized
service personnel.
Off


 
Set Temp.
Fan
Fri 10:00AM
-Status
Menu
-Status
Monitor
Next
Page
Error
Information
Error Information
Error Code
12, 14
Address
Back
Next
Page
Page 1/3
Page 1/5
<< WIRED REMOTE CONTROLLER 2 wire type>>
1. Touch the [Status] on the Monitor
mode screen.
2. Touch the [Error Information] on
the Status screen.
2-digit numbers are corresponding to
the error code
If an error occurred, an error icon appears on the Monitor mode screen.
Economy
Anti Freeze
Air Flow Direction
VT1
1
Hz
3
Off
Conference
Mode
04-05
02-01

Fujitsu Airstage VR-II ASUB24TLAV Specifications

General

Brand	Fujitsu
Model	Airstage VR-II ASUB24TLAV
Category	Air Conditioner
Language	English