Important notes
Additional safety notes for devices with
wireless components
Wirelesscom ponentsWirelessLANBluetooth,Safetynotes
If a wireless component (W ireless LAN, Bluetooth, 4G) is integrated in your Tablet PC, you must
be sure to observe the following safety precautions when using your Tablet PC:
• Switch off the wireless components when you are in an aircraft or driving in a car.
• Switch off the w ireless components when you are in a hosp ital, an operating
room or near a m e dical electronics system. The transmitted radio waves
can impair the operation of medical devices.
• Switch off the wire less components, when you let the device get near flammable
gases or into hazardous environments (e.g. gas station, paint stores), as the
transmitted radio waves can cause an explosion or a fire.
For further information on how to switch the wire less compo nents on and off, refer
to section "
Switching the wireless com ponents on and off", Page 37.
Protecting the display screen
Do not pour liquid
s on the system or wash it with a heavily soaked cloth. D o not place
itemsonthetopo
f the monitor in order to prevent it from being d amaged.
During normal u
se of the device, small particles from the environmen t
can become embe
dded in the stylus tip and scratch the screen. The
warranty does
not cover a scratched screen.
Energy savin
g
NotesEnergyPowersavin
g
If you will not be using your Tablet PC, switch it off. Switch off any connected external devices when
they are not in use. If you use th e energy-saving functions, the Tablet PC uses less power. If you do
this, you w ill be able to work longer with the Tablet PC before having to recharge the battery.
The energy efficiency is increased and environmental pollution is reduced.
You save money a nd help protect the environment.
Energy saving under Windows
► Make use of the available energy-saving functions as described in chapter
"
Using the energy saving functions", Page 33.
Fujitsu 15
To Next Page
Loading...
Need help?
General