Security functions
Trusted Platform Module - TPM (device dependent)
TPMTrusted PlatformModule
To use the TPM, you must enable the TPM in the BIOS Setup before the software is
installed. The requirement for this is that you ha ve assigned at least the supervisor
HDD password (see "
Securit y f unctions", Page 64).
Enabling TPM
• Requirement: You have assigned a supervisor password (see "Security functions", Page 64).
► Call BIOS Setup and sele
ct the Security menu.
► Mark the TPM S ecurity Chip Setting field and press the Enter key.
► Select the entry Enabl
ed to enable the TPM
Once you have enabled the TPM the Clear Security Chip menu item appears.
You can clear the hold
er in the TPM using Clear Security Chip.WithEnabled,
all secret keys (e.g
. SRK - Storage Root Keys, AIK - Attestation Identity Keys
etc.) generated by
applications are deleted.
Ta ke note that you c
an then no longer access the data you have
encrypted on the h
older-based keys!
► Select the Exit Sa
ving Changes option in the Exit menu.
► Press the Enter key and select Yes.
The Tablet PC res
tarts and the TPM is enabled after the reboot.
Disabling TPM
• Requirement: You have assigned a supervisor password (see "Security functions", Page 64).
► Call BIOS Setup and select the Security menu.
► Mark the TPM S ecurity Chip Setting field and press the Enter key.
► Select the entry Disabled to disable the TPM.
► From the Exit menu, choose the option Exit Saving Changes.
► Press the Enter key and select Yes.
The Tablet PC is rebooted and the TPM is disabled.
Fujitsu 73
To Next Page
Loading...
Need help?
General