Connecting external devices
Connecting USB devices
USBports
On the USB ports you can connect exter nal devices that also have a USB port
(e.g. a DVD drive, a printer, a scanner or a m odem).
USB devices are hot-pluggable. This means you can connect and disconnect the
cables of USB devices while the operating system is running.
USB 1.x has a maximum data t ransfer rate of 12 Mbps.
USB 2.0 has a data transfer rate of up to 480 Mbps.
USB 3.0 ha s a data transfer rate of up to 5 Gbps.
USB 3.1 has a d ata transfer rate of up to 10 Gbps.
Additional information can be found in the documentation for the USB devices.
► Connect the data cab
le to the
external device.
► Connect the data cable to the USB
port o n the Tablet PC.
or
or
or
► Connect the data cable to a USB port
of the Cradle.
► Connect the data cable to a USB port of
the keyboard docking station.
► Connect the data cable to a USB port of
the docking station.
Device d ri
vers
USB device
s will be automatically recognized and installed by your opera ting system.
How to remov e USB devic es correctly
Always correctly r emove the device according to the rules described below,
to ensure that none of your data is lost.
► Tap the symbol for safe removal of the hardware.
► Select the device you wish to shu t down and remove.
► Tap OK.
Wait for the dialog box which tells you that it is now safe to remove the device.
76 Fujitsu
To Next Page
Loading...
Need help?
General