Troubleshooting and tips
The printer does not print
Printerdoesnot print
Cause Tro ub lesho ot ing
The printer is not switched on. ► Make sure that the printer is sw
itched
on and ready for operation (ref
er to the
documentation supplied with t
he p rinter).
The printer is not connected c
orrectly.
► Check that the data cable between the Tablet
PC and the printer is properly connected.
The printer driver is faulty or not co rrectly
installed, or it is the wrong p rinter driver.
► Check that the data cable between the Tablet
PC and the printer is properly connected.
► Check whether the corre ct printer driver is
loaded (refer to the printer documentation).
The w ireless connect
ion to a network does not work
Thewireless conne
ctiontoan etworkdoes notwork
Cause Tro ub lesho ot ing
The wireless component is switched off. ► Switch the wireless component on ( see
"
Switch ing the wireless components on and
off", Page 37).
The wireless component is switched on. Despite
this, the wireless connection to a network does
not work.
► Check whethe r the wireless connection is
enabled by the software.
► Further information on using the wireless
component can be fou nd in the help files.
The battery di
scharges too quickly
Battery
Cause
Troubleshooting
The battery i
s either too hot or too cold. In this
case the batt
ery indicator flashes.
► Bring the Tablet PC up/down to a normal
operating temperature again.
► If the operating time of the battery life is
extremely short, the battery is probably too
old. Replace the battery if necessary.
You may have an application running th at
consumes a great deal of power due to frequent
accessing o f the hard disk or optical d rive.
► Use the AC adapter whenever possible.
The maximum brightn ess may have been set
for the screen .
► Reduce the brightness of the screen to
lower energy consumption: You w ill find the
setting under Control Panel – Hardware and
Sounds – Windows Mobility Center.
86 Fujitsu
To Next Page
Loading...
Need help?
General