Furuno FAR-1513-BB User Manual

5. VIDEO PLOTTER OPERATION
5-4
5.4 Own Ship’s Track
A total of 1,200 points are allotted for storage of own ship’s track, marks and lines.
When this memory becomes full, the oldest track is deleted to make room for the lat-
est. For that reason you may want to adjust the recording interval to conserve the
memory.
The table below shows the relation between plotting interval settings and maximum
track recording time.
5.4.1 How to set the plotting interval
1. Open the [MAIN MENU].
2. Select [MARK], then push the ADJUST knob.
3. Select [OWN TRACK], then push the ADJUST knob.
4. Select [SAVE INTERVAL], then push the ADJUST knob.
5. Select the appropriate setting, then push the ADJUST knob.
6. Close the menu.
5.4.2 How to set the own ship track color
1. Open the [MAIN MENU].
2. Select [MARK], then push the ADJUST knob.
3. Select [OWN TRACK], then push the ADJUST knob.
4. Select [OWN TRACK COLOR], then push the ADJUST knob. The following colors
are available.
5. Select the appropriate setting, then push the ADJUST knob.
6. Close the menu.
Interval Max. Recording Time Interval Max. Recording Time
15 s 5 hours 3 min 60 hours
30 s 10 hours 6 min 120 hours
1 min 20 hours 15 min 300 hours
2 min 40 hours DRAW ONLY No track data recorded.
Non-IMO type IMO type
• [RED] (Red)
• [GRN] (Green)
• [BLU] (Blue)
• [YEL] (Yellow)
• [CYA] (Cyan)
• [MAG] (Magenta)
• [WHT] (White)
OWN TRACK COLOR is not adjustable for IMO type radars.
Own track appears in (Cyan) color.

Furuno FAR-1513-BB Specifications

General

Brand	Furuno
Model	FAR-1513-BB
Category	Marine Radar
Language	English