Furuno FAR-1513-BB User Manual

1. OPERATIONAL OVERVIEW
1-72
Note: When the antenna is located some distance from the CCRP, the CCRP can be
outside the bearing cursor in true motion or off-center.
Also, when the CCRP is set as reference point, some parts of the bearing cursor are
not displayed.
1.49 Anchor Watch
The anchor watch feature alerts you when your ship has traveled a distance greater
than a threshold value, when it should be at rest. When the anchor watch is active, an
orange dashed circle marks the anchor watch range.
If your ship goes outside the circle, the indication "ANCHOR WATCH" appears in the
[ALERT] box.
1. Open the [MAIN MENU].
2. Select [ALERT], then push the ADJUST knob.
3. Select [ANCHOR WATCH], then push the ADJUST knob.
4. Select [ON] to enable [ANCHOR WATCH].
5. Using the ADJUST knob, set the distance for the alert. Push the ADJUST knob
to apply the setting.
6. Close the menu.
CPA, TCPA Calculated with an-
tenna position at
center.
Calculated with
CCRP at center.
BCR, BCT Calculated from bow position.
Own ship data Heading Data is taken from respective sensors, re-
gardless of reference point selected.
Speed
Course over ground
Speed over ground
Own L/L Location of the CCRP.
Category Item
Reference point
ANT CCRP
A
nchor watch
alarm setting
Own ship location when
anchor watch is set
Own ship moves
outside watch zone
Alarm is
triggered

Furuno FAR-1513-BB Specifications

General

Brand	Furuno
Model	FAR-1513-BB
Category	Marine Radar
Language	English