4. AIS OPERATION
4-23
14. Select [END] to complete message input, then left-click.
15. Select [3 SAVE FILE].
16. Spin the scrollwheel to select the appropriate number, then left-click.
17. Close the menu.
4.17.2 How to transmit messages
1. Open the menu.
2. Select [5 TT•AIS].
3. Select [5 AIS].
4. Do one of the following:
a) Create a message, as described in paragraph 4.17.1.
b) Use a file saved in the memory by selecting [5 TRANSMIT MESSAGE] fol-
lowed by [2 OPEN FILE] from the second page of the [TRANSMIT MESSAGE]
menu.
5. Select [5 TRANSMIT MESSAGE] from the second page of the [TRANSMIT MES-
SAGE] menu to transmit the message.
During transmission, the message "AIS TRANSMITTING" appears in the guid-
ance box. The message disappears when the message is sent successfully.
"TRANSMIT ERROR" appears in the alert box if an error occurred while transmit-
ting the message.
6. Close the menu.
Message contents
appear here
To Next Page
Loading...
Need help?
General
