FELCOM 82
H3-28
3.5 Status monitor
The SYS CPU handles the status monitor.
3.5.1 Display on handset
To show the monitor screen on the handset;
1. Press [FUNC] [4] [1] in this order.
2. Press an arrow key to change the page.
41 Monitor 41 Monitor
Heading 270 Tx EIRP 000
Az 119 Tx RF 000
El 30 Rx C/N 053
LAT 34:00.00 N Rx IF AGC 154
LON 135:00.00 E
41 Monitor 41 Monitor
Rx Synth OK ANT REMOTE
Tx Synth OK El Axis OK
Rx Ch 11292 Az Axis OK
Tx Ch 10000 Cross El OK
3. Press [HOLD Print] key to print out the status if necessary.
------- 41 Monitor <2000-06-20 00:00(UTC)> -------------------------------
Current Satellite POR Tx EIRP Level 000
Channel Status SYNC Tx RF Level 000
MES Status Ready Rx C/N 053
Rx IF AGC Level 154
Heading 270 DEG
Antenna Bearing 209 DEG Rx Synthesizer OK
Antenna Azimuth 119 DEG Tx Synthesizer OK
Antenna Elevation 30 DEG
Antenna Status REMOTE
Position LAT 34:00.00N El AXIS OK
LON 135:00.00E Az AXIS OK
NAV DATA NMEA Cross El AXIS OK
GYRO DATA OK Rx Channel 11292
Tx Channel 10000
a
b
c
d
e
f
g
h
4. Press [FUNC Quit] key several times to close the menu.
Refer to 7.4.3.
To Next Page
Loading...
Need help?
General
