Furuno FM-7500 User Manual

K1-11
3.7 Installing System Files
After preparing the FD that contains the system files backuped in page K1-7 (including
"FORMAT.COM" file), changing BIOS settings, DIP SW of CPU Card, and the internal
connector, write the system files in the Flash ROMs as follows.
1. Set the FD containing the system files (including "FORMAT.COM" file) in the FD
drive.
2. - Turn on power, and continue to press [ESC] key.
Continue to press [ESC] key until a display "Starting PC DOS..." appears. Then, PC-
DOS will start from the FD system files.
3. Continue to operate according to the displayed operational instructions.
A date and time input display will appear, but it is not necessary to input date and time.
"Current date is XX",
- Pressing key [Enter].
"Current Time is XX" ,
- Pressing key [Enter].
4. The prompt "A:¥>" will appear on the screen.
5. To format the C-drive(Flash ROMs) and copy the system files at the same time.
(See note)
- Press [F],[O],[R],[M],[A],[T],[Space],[C],[:],[Space],[/],[S],[Enter] keys
succssively.
Note) The drive name of the Flash ROMs disk depends upon whether PC-DOS is
installed in the
Flash ROMs disk, or not. The name is "A-drive" if PC-DOS is installed, and "C-drive"
if not.
6. A display "Insert new diskette for C-drive and press ENTER when ready..." will appear.
- Then, press [Enter] key.
7. Continue to operate according to the displayed operational instructions.
“Proceed with Format(Y/N) ?”
- Press [Y],[Enter] keys.
“Volume label (11 characters, ENTER for none)?”
- Press [Enter] key.
“Format another (Y/N) ?”
- Press [N],[Enter] keys.
IB-581

Furuno FM-7500 Specifications

General

Brand	Furuno
Model	FM-7500
Category	Marine Equipment
Language	English