FELCOM 82
H3-4
2.2.3 T/Rx Volume level setting
The system provides T/Rx volume (Codec Level) setting function for the voice
communication. This function is set on the “Codec Level” menu as follows.
1. Press [FUNC] [*] [2] [6] [3] [3] [2].
“Codec Level” appears as follow.
Codec Level
Codec IN: 20
Codec OUT: 80
Enter:[Ent]
Quit:[Quit]
2. Set Codec IN level and Codec OUT level to a desired value.
Codec IN adjusts Tx level and Codec OUT Rx level. The adjustable range is 10 to 90.
3. Press [Enter] key.
2.3 Fax setting (PFX-50)
At installation and when the machine is not used for one month or more, the fax
machine must be set up again.
2.3.1 Changing dialing parameters
To change dialing parameters,
1. Turn on the fax while pressing and holding down [1] [3] and [*].
(This step is to clear the memory.)
2. Press [AUTO RCV/YES].
3. Enter ship's name by referring character code list in the operator's manual.
4. Press [AUTO RCV/YES].
5. Enter the fax number of own station.
6. Press [AUTO RCV/YES] twice.
7. Press [FUNCTION/NO], then, change line type from DP to PB (tone dialing).
8. Press [AUTO RCV/YES] twice.
9. Enter Year/month/date and time. For example, type 0102101230 for 12:30,
February 10, 2001.
10. Press [AUTO RCV/YES].
11. After "01-02-10 TEL" appears, press [AUTO RCV/YES] to change the display to
"01-02-10 FAX. "
To Next Page
Loading...
Need help?
General
