45
Basic Operation
T32MZ transmitter can register user's name.
How to register user's name
1. Turn on the power of the transmitter.
2. Push the area of the user's name shown on the home screen or the "user's name" in the system
menu. Then the User's Name Set screen will pop up.
3. Push the user's name. Then the keyboard will pop up. You can use up to 32 characters as a user's
name. Use the keyboard on the screen to enter user's name.
4. Push "Return" key to return to the previous screen after entering the user's name.
(If you want to protect the user's name)
If you don't want anybody else to change your user's name, set your ID in the following way.
*Please be aware that you will not able to change user's name if you forget your password.
1. Make sure that the security mode is "User's name", and then push the User ID button.
2. Enter your password, using keyboard on the screen.
You will need to enter your password for
changing the user's name, the next time you turn on the power.
are using "Transform" mode or "Direct" mode for inputting.
To Next Page
Loading...
Need help?
General
