＜
Linkage Menu
＞
HELICOPTER
AIRPLANEGLIDER
This function is used to load the settings of the desired
model into the T32MZ’s memory.
The settings may be selected from either the transmitter’s
built-in memory or a microSD card. The name of the
model stored in the transmitter and the microSD card
may be changed. This can be very useful to tell different
models settings apart. Each model name can be as long
as 32 characters, and the model name always appears in
the display screen.
The Copy function is used to copy one set of model data
into a second memory within the transmitter and the
microSD card. It may be used for getting a head-start on
setting up models with almost the same settings (only
complete model from scratch). Also, this function may be
used to make a backup copy of a model setup before any
changes are made.
1.
To Next Page
Loading...
Need help?
General
