＜
System Menu
＞
HELICOPTER
AIRPLANE
GLIDER
The 'range check mode' reduces the transmission range
of the radio waves to allow for a ground range check.
*The range check mode, when activated, will continue for
90 seconds unless the user exits this mode early. When the
progress bar reaches 90 second mark, the RF transmission
automatically
returns to the normal operating power.
→
→
?
[
[
*Since the range of the radio waves is short, if the
model is too far from the transmitter, control will
be lost and the model will crash.
To Next Page
Loading...
Need help?
General
