＜
System Menu
＞
HELICOPTER
AIRPLANEGLIDER
An S.BUS servo can memorize the channel and various
settings itself. Servo setting can be performed on the
Individual ID numbers are memorized for your S.BUS
servos in your T32MZ. When a servo is used (as shown
at the right), the servo ID number is automatically read by
the transmitter.
If you use multiple S.BUS servos and do not want to
change the settings on all that are mounted in a fuselage,
only the desired servo in the group can be set by entering
* S9070SB cannot be arranged by T32MZ.
* With S.BUS servos of use, there are a function which can
be used, and an impossible function and a display screen
changes.
(Only the function which can be used by a servo is displayed.)
* After reading completion, with connection of the above
can be operated and carried out.
While S.BUS servo writes, you aren't supposed
to remove a connection of a servo and turn off
a power supply of a transmitter.
*Data of S.BUS servo is damaged and breaks down.
ID
ID
ID
0
42
42
0
0
87
Press
"42"
Press
"87"
To Next Page
Loading...
Need help?
General
