Position Data Page
The Position Data page shows important navigation data while
navigating a route in Operation mode. By default, the Position Data
page shows a compass ribbon, your current latitude and longitude,
date and time, your location in relation to a prominent nearby
landmark (such as a waypoint or city), and eight user-selectable data
elds. The compass ribbon appears at the top of the page to show
your current heading with a red, vertical bar. To stay on course, steer
toward the violet bar (or arrows) until it is aligned with the red bar.
Position Data page
Position Data Page Options
1. Press Page until the Position Data page appears.
2. Press Menu to open the Position Data page options menu.
Change Nearest Type—allows you to specify the type of item used
as the nearest item (shown in the lower-left data eld). The choices
change based on the current usage mode.
Reset Trip—allows you to clear trip information, except the
maximum speed and the odometer.
Reset Max Speed—allows you to clear the maximum speed.
Reset Odometer—allows you to clear the running total of the
distance traveled since the odometer was last reset.
Reset All—allows you to clear all trip information, including the
maximum speed and odometer.
48 GPSMAP 580/585 Owner’s Manual
Operation Mode Pages
To Next Page
Loading...
Need help?
General
