Opening the Media Player
Before you can open the media player, you must connect a compatible device to the chartplotter.
Select Vessel > Media.
TIP: To quickly add the media overlay to a page, select Toolbars > Media > Add.
Media Player Icons
NOTE: Not all devices have these icons.
Icon Description
Saves or deletes a channel as a preset
Repeats all songs
Repeats one song
Scans for AM/FM radio stations
Skips to next or previous track (tap)
Fast forwards or rewinds (hold)
Shuffles
Increases the volume
Decreases the volume
Mutes volume
Expands the media player to full screen
Selecting the Media Device and Source
You can select the media source connected to the stereo. When you have multiple stereo or media devices
connected on a network, you can select the device from which you want to play music.
NOTE: You can play media only from sources that are connected to the stereo.
NOTE: Not all features are available on all media devices and sources.
1 From the media screen, select Devices, and select the stereo.
2 From the media screen, select Source, and select the media source.
NOTE: The Devices button only appears when more than one media device is connected to the network.
NOTE: The Source button only appears for devices that support multiple media sources.
Adjusting the Volume and Audio Levels
Adjusting the Volume
NOTE: If your vessel's media system is set up in zones, the volume controls on the media screen adjust the
volume for the Home Zone (Selecting the Home Zone, page141).
From the media screen, use the slider or and to adjust the volume.
140 Media Player
To Next Page
Loading...
Need help?
General
