EasyManuals Logo
Home>GE>Controller>D25

GE D25 User Manual

GE D25
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #118 background imageLoading...
Page #118 background image
D25
User's Manual
GE Grid Solutions
118
994-0081-3.00-21 GE Information
Module Replacement, Continued
Remove the Front Panel
5 With the ribbon cable
disconnected, shift the panel
to the right.
6 Pull the panel towards the
front to disengage the panel
from the slots in the lower
front edge of the enclosure.
The panel will now be free of the
enclosure
Main Board
Procedure:
WESDAC
Board Removal
How to remove the WESDAC board.
Before starting this procedure, see above: Disassembling the D25.
Step Action
1 Locate and loosen the captive screws that hold the metal mounting
plate in the D25 housing.
2 Pull the metal mounting bracket at both sides of the WESDAC
Board to disconnect connectors on back of board.
3 Tilt the module slightly so that the metal housing does not obstruct
its removal.
4 Carefully slide the mounting plate and attached WESDAC Board
out of the housing.
WESDAC
Board Removal
Grasp Mounting Bracket
Handles

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE D25 and is the answer not in the manual?

GE D25 Specifications

General IconGeneral
BrandGE
ModelD25
CategoryController
LanguageEnglish

Related product manuals