GE D25 User Manual

D25
User's Manual
GE Grid Solutions
152
994-0081-3.00-21 GE Information
Appendix A: Product Specifications
Electrical Specifications
Power Supply
Input Options:
60-150 V
dc
/ 115 V
ac
±10% 50/60 Hz
250 V
dc
±20% / 230 V
ac
+15%/-20% 50/60 Hz
Power Consumption 65 Watts (maximum)
Maximum inrush current on cold
start (peak Amps)
18
Maximum inrush current under
dynamic conditions of 5 seconds on
and 1 second off (peak Amps)
45
Output Options:
24V unregulated output
(Power Supply with GE part number
521-0143 or 521-0144)
- with minimum load (internal 8.2K Ohm), output is
21.6 to 26.8VDC, <50mV ripple
- with maximum loads (32 Ohm) is 21.6 to 26.8,
<50mV ripple
48V unregulated output
(Power Supply with GE part number
521-0145 or 521-0146)
- with minimum load (internal 8.2K Ohm) is 43.2 to
52.8VDC, <50mV ripple
- with maximum loads (64 Ohm) is 43.2 to 52.8VDC,
<50mV ripple
Communication Ports
Maintenance WESMAINT II+ DB-9-F, EIA 232 @ 9600 bps
D25 Display DB-9-F, EIA 485 @ 9600 bps
UTC Time DB-9-F, EIA 232/422
Standard Serial Communication (2) DB-9-F, EIA 232/485 up to 38400 bps
software configurable
Optional XCOM (2) DB-9-F, EIA 232/485 up to 38400 bps software
configurable, or Ethernet/802.3
10BASE2, 10BASE-T or 10BASE-FL

GE D25 Specifications

General

Brand	GE
Model	D25
Category	Controller
Language	English