Service Data
Lubricant and Fuel Chart
Use different lubricants, greases and fuels according to the temperature, referring to the chart below.
Change the lubricant earlier than as shown in the table if it is extremely dirty or its performance has
deteriorated severely.
Whenever possible, use the same brand of lubricant as before. If changing with a different brand,
replace the entire quantity – do not mix different brands.
Lubricants and greases
Part Type
Replacement
interval
Capacity
Lit. (US. qt.)
Type by temperature
-22 -4 14 32 50 68 86
104°F
-30 -20 -10 0 10 20 30
40°C
Engine
oil pan
Diesel engine
oil API-CF or
higher
After first 50
hrs.
Every 250 hrs.
Hydraulic
tank
Engine
cooling
system
Travel
reduction
gear
Working
equipment
Cooling
water (water
+ coolant)**
Gear oil
API-GL-4
Lithium-
based grease
EP-2
NLGI No.2
Every 1000 hrs.
Every 1000 hrs.
Daily or every
10 hrs.
When required
After first 250
hrs.*
Every 500 hrs.
As required
SAE 90
Diesel engine
oil API-CD, CE
or CF
Levers and
Pedal
CTL55:1.0 (1.06)
CTL65:1.0 (1.06)
CTL75:1.6 (1.69)
CTL85:1.6 (1.69)
CTL55:11 (11.6)
CTL65:16.5 (17.4)
CTL75:16.5 (17.4)
CTL85:16.5 (17.4)
System
CTL55:45
(11.9 US.gal.)
CTL65:58
(15.3 US.gal.)
CTL75:75
(19.8 US.gal.)
CTL85:95
(25.1 US.gal.)
Tank
CTL55:29
(7.7 US.gal.)
CTL65:39
(10.2 US.gal.)
CTL75:49
(12.8 US.gal.)
CTL85:60
(15.9 US.gal.)
Upper limit
CTL55:7.4(7.8)
CTL65:10.2(10.8)
CTL75:10.2(10.8)
CTL85:13.2(13.9)
SAE 10W-30
SAE 15W-40
30% coolant mixture
50% coolant mixture
SAE 10W-30
SAE 10W-40
To Next Page
Loading...
Need help?
General
