Maintenance Chart
* If the percentage of the travel time within the total operating time is high, replace the gear
oil earlier than the specified time.
Maintenance Items Page
Walk-Around Inspection
Inspecting by opening the engine hood and rear door 114
Inspecting by walking around the machine 115
Inspecting while sitting in the operator’s seat 115
Daily Inspection (Every 10 Hours)
Inspecting and replenishing the coolant 116
Inspecting and replenishing the engine oil 117
Inspecting the water separator 117
Inspecting the fuel level 118
Inspecting the hydraulic oil level and replenishing 119
Lubricating the working equipment 120
After First 50 Hours (New Machines Only)
Replacing the hydraulic oil return filter 122
Replacing the engine oil and oil filter 123
Inspecting and adjusting the fan belt 125
Replacing the pilot line filter 126
Every 50 Hours
Inspecting and adjusting the track tension 128
Inspecting the battery fluid level and replenishing 130
Draining the fuel tank 132
Inspecting the bucket stoppers (bolts / nuts) 133
Every 100 Hours
Cleaning the water separator 134
After First 250 Hours (New Machines Only)
Replacing the travel motor gear oil* 135
To Next Page
Loading...
Need help?
General
