Stopping Precautions
Park safely
Park the machine on firm, level ground and
apply the parking brake. If you must park
on a slope or incline, block the machine
securely to prevent movement.
When parking on streets, use barriers,
caution signs, lights, etc., so that the
machine can easily be seen at night to
avoid collisions with other vehicles.
Before leaving the machine, do the
following:
1. Lower the bucket to the ground.
2. Set the safety bar in the lock (raised)
position.
3. Stop the engine and remove the key.
4. Lock the covers.
Never leave the machine with the engine
running or the lift arms raised, unattended.
If lift arms are left in a raised position, they
MUST be supported by the lift arm stop.
To Next Page
Loading...
Need help?
General
