Before Starting Operation
Mounting and Dismounting
WARNING
Do not jump on or off the machine.
Never attempt to mount or dismount a
moving machine.
When mounting and dismounting the
cab, first open the door fully to the
locked position and check that it does
not move (for machines with front
door).
Always face the access system and
maintain a three-point contact with the
handholds and steps while getting on
and off the machine. Keep steps and
platform clean.
Never use the control levers as hand
holds.
Walk-Around Inspection
Perform the walk-around inspection before
starting the engine the first time each day.
Perform the inspection as described under
“Maintenance - Walk-Around Inspection”
(pages 114 and 115).
Daily Inspection
Perform the daily inspection once a day
before starting the engine the first time each
day.
Perform the inspection as described under
“Maintenance - Daily Inspection” (pages
116 to 120).
To Next Page
Loading...
Need help?
General
