Gemini GEM-P9600 Programming Instructions

X
GEM-P9600 Programming Instructions
L
NAPCO Security Systems
WI777D 08/00
!
Page 70
KEYPAD PROGRAMMING MODES
Note:
!
1. Functions that are not active, not programmed and/or not applicable to user’s authority level will be suppresses
and will not display.
!
2. Due to space constraints, GEM-RP2ASe2 messages are abbreviated.
!
3. Many functions will not be displayed (such as: “
DISPLAY ZN FAULTS
”). It will require a faulted zone to display.
12
4
3
56
7890
A
B
C
D
E
F
G
NEXT/YES
PRIOR/NO
AREA
Scroll Down
Scroll Up
Exit
Yes
No
Press
A
button
FUNCTION
LEVEL
(A)
DISPLAY ZN FAULTS
1
DISPLAY ZN BYPASSED
1
DISPLAY ZN DIRECTORY
1
ACTIVE BELL TEST
1
DISPLAY PHONE #’S
1
DISPLAY SYS TRBL
1
DISPLAY FIRE ALARM
1
DISPLAY FIRE TRBL
1
DISPLAY OP/CL
3
ACTIVATE OVERVIEW
3
(B)
ACTIVATE CHIME
1
ACTIVATE WATCH
2
ACTIVATE GUARD TOUR
2
RESET SYSTEM TRBL
3
RESET SENSOR MSG
3
START EXIT TIME
1
FAULT FIND
(C)
ACTIVATE LOCATE
(C)
EZM ZONE FIND
(C)
FUNCTION
LEVEL
(A)
ACTIVATE DIALER TEST
3
DISPLAY ALARM LOG
(D)
3
DISPLAY TOTAL LOG
(D)
3
DISPLAY FIRE LOG
(D)
3
DISPLAY OP/CL LOG
(D)
3
DISPLAY SYSTEM LOG
(D)
3
TO ARM IN 1-4HRS
2
DISPLAY AUTO ARM SCHD
3
ACTIVATE PROGRAM
3
(B)
ACTIVATE DOWNLOAD
3
DISPLAY RF XMITTER STAT
3
RELAY CONTROL
1
FUNCTION MODE
(A)
Minimum level required to access function
(B)
Level 3 code with appropriate option
(C)
Requires dealer code
(D)
Not available in GEM-RP2ASe2 / GEM-RP3DGTL keypads
(E)
Initial Configuration only; suppressed thereafter
Keypad Programming Modes: Function Mode

Gemini GEM-P9600 Specifications

General

Brand	Gemini
Model	GEM-P9600
Category	Security System
Language	English