GW Instek ASR-2000 Series - Measure[:Scalar]:Current:cfactor; Measure[:Scalar]:Current:high; Measure[:Scalar]:Current:low; Measure[:Scalar]:Current:peak:clear

ASR-2000 Programming Manual
58
:MEASure[:SCALar]:CURRent:CFACtor
Query
Description
Returns the output current crest factor (CF).
Query syntax
:MEASure[:SCALar]:CURRent:CFACtor?
Return parameter
<NR2>
Returns the crest factor.
:MEASure[:SCALar]:CURRent:HIGH
Query
Description
Returns the output current maximum peak value
(Imax).
Note:
Current maximum peak value is defined as the
highest peak value in the complete period.
Query syntax
:MEASure[:SCALar]:CURRent:HIGH?
Return parameter
<NR2>
Returns the Imax value in amps.
:MEASure[:SCALar]:CURRent:LOW
Query
Description
Returns the output current minimum value (Imin).
Note:
Current minimum value is defined as the lowest
value in the complete period.
Query syntax
:MEASure[:SCALar]:CURRent:LOW?
Return parameter
<NR2>
Returns the Imin value in amps.
:MEASure[:SCALar]:CURRent:PEAK:CLEar
Set
Description
Clears the current peak-hold value.
Syntax
:MEASure[:SCALar]:CURRent:PEAK:CLEar
:MEASure[:SCALar]:CURRent:PEAK:HOLD
Query
Description
Returns the current peak hold value in amps (IPK
Hold).
Query syntax
:MEASure[:SCALar]:CURRent:PEAK:HOLD?