GW Instek ASR-2000 Series Programming Manual

ASR-2000 Programming Manual
98
Return parameter
<NR1>
Current step
+0 = Initial step
+1 = Normal1 step
+2 = Transition1 step
+3 = Abnormal step
+4 = Transition2 step
+5 = Normal2 step
Example
:SIM:CSTep?
>+1
[:SOURce]:SIMulation:INITial:CODE
Set
Query
Description
Sets the external trigger output for the initial step
parameter. This option is only applicable when in
the Simulation mode.
Syntax
[:SOURce]:SIMulation:INITial:CODE
{<NR1>|MINimum|MAXimum}
Query Syntax
[:SOURce]:SIMulation:INITial:CODE?
[MINimum|MAXimum]
Parameter/Return
parameter
<NR1>
0=LL, 1=LH, 2=HL, 3=HH
MINimum
0 (LL)
MAXimum
3 (HH)
Example
SIM:INIT:CODE 1
[:SOURce]:SIMulation:INITial:FREQuency
Set
Query
Description
Sets or queries the frequency of the initial step of
the simulation mode.
Syntax
[:SOURce]:SIMulation:INITial:FREQuency
{<NR2>|MINimum|MAXimum}
Query Syntax
[:SOURce]:SIMulation:INITial:FREQuency?
[MINimum|MAXimum]
Parameter/Return
parameter
<NR2>
Frequency of initial step
MINimum
Minimum frequency
MAXimum
Maximum frequency

GW Instek ASR-2000 Series Specifications

General

Brand	GW Instek
Model	ASR-2000 Series
Category	Portable Generator
Language	English