GW Instek ASR-2000 Series - Measure:configure:sensing; Measure[:Scalar]: Voltage:harmonic:ratio; Measure[:Scalar]: Voltage:harmonic[:Rms]

ASR-2000 Programming Manual
62
:MEASure[:SCALar]: VOLTage:HARMonic[:RMS]
Query
Description
Returns 41 values covering Total and order 1 to 40
voltage (Vrms) in harmonic. (Only AC-INT and 50
/60 Hz Active)
Query syntax
:MEASure[:SCALar]: VOLTage:HARMonic[:RMS]?
Return
<NR2>,<NR2
>,<NR2>,
<NR2>…, etc.
Returns the entire 41 values
containing Total and order 1 to 40
voltage (Vrms) in harmonic.
:MEASure[:SCALar]: VOLTage:HARMonic:RATio
Query
Description
Returns 41 values covering Total and order 1 to 40
voltage (Ratio) in harmonic. (Only AC-INT and 50
/60 Hz Active)
Query syntax
:MEASure[:SCALar]: VOLTage:HARMonic:RATio?
Return
<NR2>,<NR2
>,<NR2>,
<NR2>…, etc.
Returns the entire 41 values
containing Total and order 1 to 40
voltage (Ratio) in harmonic.
:MEASure:CONFigure:SENSing
Set
Query
Description
Sets or queries the remote sense configuration.
(Only AC-INT, DC-INT, AC-SYNC Mode and
100V, 200V Range and SIN Wave Shape and Time
Slew Rate Mode Active)
Syntax
Query Syntax
:MEASure:CONFigure:SENSing {<bool>|OFF|ON}
:MEASure:CONFigure:SENSing?
Parameter
OFF | 0
Turns the remote sense off.
ON | 1
Turns the remote sense on.
Return parameter
<bool>
Returns the status of remote sense.
Example
:MEAS:CONF:SENS 0
Sets the remote sense off.